Installing a hot water tank is integral to ensuring that your home indoors remains comfortable across seasons, especially during colder months. A properly installed hot water tank means that you can have hot water as and when you may require it, whether for showering, doing laundry, or washing dishes. However, when it comes to hot water tank installation in Calgary, it is likely to be an extremely complicated process for the average Canadian since the same calls for a fair amount of expertise and professional acumen, not to mention having the right equipment at one’s ready disposal. Hence, today, we will guide you through all the steps of installing one.
Shop Around and Invest in a Suitable Hot Water Tank
Before you begin the installation process, make sure to purchase an appropriate hot water tank for your house. There are various kinds of hot water tanks available these days, including electric, gas, and tankless models. You should take into account the household size, water usage, and energy efficiency of the hot water tank in question when looking for the best tanks that money could buy.
Turn Off the Water and Drain the Old Hot Water Tank
The next step is to turn off the water supply to your home and drain the old hot water tank completely. You can do this by turning off the water shut-off valve located near the hot water tank and opening a hot water tap in your house to let the water flow out eventually. You may also need to disconnect the gas or electricity supply to the hot water tank beforehand.
Remove Your Old Hot Water Tank
Once you have drained the old hot water tank, you can start uninstalling it. Begin by disconnecting the pipes and fittings from the same. This may include disconnecting the gas or electricity supply, the hot water outlet, and the cold-water inlet. Next, remove the old hot water tank from its location, and make sure not to damage any pipes or fittings that are still connected. This is precisely how seasoned and qualified plumbers for hot water tank installation in Calgary proceed.
Prepare the New Hot Water Tank
Before you can install the new hot water tank, you will need to prepare it. This may involve installing new fittings, such as a pressure relief valve, temperature gauge, drain valve, and pressure gauge. Make sure that you follow the manufacturer’s instructions accurately when preparing the same.
Install Your New Hot Water Tank
Once the new hot water tank is prepared, it is time to install it. Start by carefully positioning the tank in its intended location, ensuring that the same is secure and leveled properly. Next, connect the pipes and fittings to your new hot water tank. This may include connecting the gas or electricity supply, the hot water outlet, and the cold-water inlet.
Fill and Test the New Hot Water Tank
As soon as you have completed installing the new hot water tank, you can fill it with water and test the same. Open the water shut-off valve and let the tank fill with water. Next, turn on the gas or electricity and wait for the tank to heat up. You may need to adjust the temperature setting on the tank to ensure that the water is at the desired temperature.
Insulate Your New Hot Water Tank
To improve the energy efficiency of your new hot water tank and reduce heat loss to a bare minimum, consider insulating it. You may purchase an insulation blanket that is purpose-designed to work with a hot water tank from your local hardware outlet.
Ensure Periodic Maintenance for the New Hot Water Tank
Finally, to ensure that your new hot water tank continues to function properly, remember to maintain it regularly. This may include flushing the same to remove sediment and mineral accumulation over time, checking the pressure relief valve, and examining it for any potential leak or visible damage. Make sure to follow the manufacturer’s instructions for routine maintenance and reach out to a veteran technician possessing an unrivaled level of familiarity with hot water tank installation in Calgary whenever you come across any issues.
Call AJ Furnace and AC Repair now for a FREE estimate!